Start with the fixed points in your bathroom
The Oblique Towel Ring and Oblique Toilet Butler solve two different bathroom problems: where a hand towel lives and where spare toilet rolls go. Before you buy either, measure the wall or floor space each one needs and decide which job matters more in your layout. The towel ring is wall-mounted; the toilet butler stands on the floor. That single difference usually determines which piece goes where.
Both are part of the Oblique range, so they share the same angled accent and mirror-polished 18/10 stainless steel finish. The catalog states that this material is ideal for the bathroom environment because it does not rust or corrode. That makes the pair a practical match if you want a consistent look without mixing finishes.
Oblique Towel Ring: dimensions that drive placement
- Oblique Towel Ring: Distance from wall: 56 mm; height: 142 mm; width: 158 mm. These are the projected and face dimensions you need when checking wall space beside a basin or shower.

Oblique Towel Ring - Oblique Towel Ring: Made from mirror-polished 18/10 stainless steel and supplied with all screw fittings for wall fixing. The fixing hardware is included, so you can plan the installation without sourcing separate screws.
How to choose a spot for the towel ring
The catalog does not prescribe a mounting height or distance from a basin. Use the ring's dimensions and your own reach as the guide, and check the wall for obstructions before drilling.
- Check the swing and reach: The ring projects 56 mm from the wall and is 158 mm wide. Leave enough clear space around it for a hand towel to hang without brushing a cabinet, mirror or shower screen.
- Keep it within easy reach of the basin: A hand towel ring works best where you can reach the towel without stepping away from the sink. The catalog does not specify a height, so test the position at your own standing reach before fixing.
- Confirm the fixing surface: All screw fittings are supplied, but the catalog does not state which wall types the fittings suit. If you have plasterboard, tile or another specialist surface, check with your installer before drilling.
- Allow for the angled shape: Oblique fittings have a distinctively angled form. Look at the ring from the main viewing angle in your bathroom to make sure the angle reads as intended rather than crowding a nearby edge.
Oblique Toilet Butler: what it holds and how it fits
- Oblique Toilet Butler: Floor-standing toilet butler with a removable toilet roll holder that allows up to 4 rolls to be stored tidily. This is the core storage capacity: one roll in use plus spare rolls held in the butler.

Oblique Toilet Butler - Oblique Toilet Butler: Height: 610 mm; length: 143 mm; width: 179 mm. Use these measurements to check floor space beside the toilet and clearance for the removable holder.
- Oblique Toilet Butler: Made from 18/10 mirror-polished stainless steel, which the catalog describes as ideal for the bathroom environment because it does not rust or corrode. The material claim supports using it in a humid bathroom, though the catalog does not give a specific humidity or wet-area rating.
Toilet butler storage ideas that match the design
The butler is designed to hold rolls tidily, but the catalog does not specify where each roll sits or how the removable holder is used in detail. These ideas work within that limitation.
- Keep the working roll on the holder: The removable toilet roll holder is the part you lift off to change the roll. Store spare rolls in the butler body so the next roll is within reach.
- Use the 4-roll capacity as your restock signal: When the butler is down to its last spare, restock. That keeps the floor-standing unit useful without turning it into a bulk cupboard.
- Place it on the free side of the toilet: At 610 mm tall and 179 mm wide, the butler needs a clear floor patch. Check that it does not block the door swing or sit where you step.
- Keep the finish dry after cleaning: The catalog says the butler is easy to polish with a soft cloth. Wipe it dry rather than leaving standing water on the mirror-polished surface.
How the two Oblique pieces work together
The towel ring and toilet butler are not a matched set in the catalog, but they share the Oblique angled accent and the same 18/10 mirror-polished stainless steel. If your bathroom already has other Oblique fittings, these two extend that look without introducing a second finish.
The catalog notes that Oblique accessories and fittings are made in as few pieces as possible, which it links to increasing each product's life. It also states that the Burford and Oblique ranges complement each other while offering slightly different qualities and forms. That gives you a legitimate option to mix ranges if one piece suits your space better.
Wall-mounted ring vs floor-standing butler
- Towel ring: Fixes to the wall with supplied screws. Best where wall space near the basin is available and you want a hand towel off the counter. Projects 56 mm.
- Toilet butler: Stands on the floor. Best where floor space beside the toilet is free and you want spare rolls stored out of the way. Holds up to 4 rolls.
- Shared finish: Both use mirror-polished 18/10 stainless steel, which the catalog says does not rust or corrode in the bathroom environment.
What the catalog does not confirm
The supplied information does not include mounting heights, wall-type compatibility, load limits, or a full care routine beyond polishing with a soft cloth. It also does not state whether the toilet butler is suitable for wet-room floors or how the removable holder locks in place. Treat those as questions to resolve with the retailer or installer rather than assuming a specification.
Both products are described as gift boxed, which matters if you are buying one as a housewarming present. The catalog prices shown are USD 39.60 for the towel ring and USD 79.20 for the toilet butler, against comparison prices of USD 60.00 and USD 110.00 respectively.


